Seat/Rear Fender; Front Fender - Honda TRX400EX FOURTRAX 1999 Service Manual

Table of Contents

Advertisement

CAUTION:
The rear fender may be deformed if it contacts the
muffler while the exhaust system is hot.
REMOVAL
Unlock the seat by turning the lock lever upward.
Raise the seatlfender assembly up and remove it.
D
not allow the
O
assembly to
INSTALLATION
contact the
muffler when the
Install the seatlfender assembly by inserting the hook
exhaust
between the screw and fuel tank and the prongs onto
the front mounting rubbers of the frame.
Push the seatlfender assembly forward and align the
mounting bosses with the rear mounting rubbers,
then press down to lock it.
FRONT
FENDER
Gasoline
under certain conditions. KEEP OUT OF REACH OF
CHILDREN.
Remove the seatbear fender assembly.
Release the four trim clips by raising the center pin
and remove them.
Remove the breather tube and fuel fill cap.
Release the four tabs from the slits in the fender while
sliding the fuel tank upper cover rearward and remove
it.
Install the fuel fill cap.
2-2
LOCK LEVER
i s
extremely flammable and is explosive
UPPERCOVER
TRIM
CLIPS
TABS
MOUNTING RUBBERS
FUEL FILL CAP

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Trx400ex fourtrax 2000Trx400ex fourtrax 2001

Table of Contents