Engine Installation - Honda TRX400EX FOURTRAX 1999 Service Manual

ENGINE REMOVAL/INSTALLATION
Remove the swingarm pivot nut and bolt.
Remove the engine out of the frame to the right.

ENGINE INSTALLATION

Install the engine into the frame from the right side in
the reverse order of removal.
NOTE:
Before installing, make sure that the pivot collars
are installed into the swingarm pivots.
Note the installation direction of the mounting
bolts and the position of the spacers.
The front hanger plates are identified by marks
them
.
Install the swingarm pivot bolt and nut.
Install the lower engine hanger bolt, spacers (Left:
Install the front engine hanger plate with the bolts
and clamp.
Install the front engine hanger bolt, spacer (right
side of the engine), guide and nut.
Install the upper engine hanger bolt, spacers (Left
Tighten the nuts to the specified torque.
6-4
80 IbfW
74 N m (7.5 kgfm, 54 Ibf4t)
74 N m (7.5 kgfm, 54 1bf.h)
m (5.5 k g f m