TIRES
.
WHEEL INSTALLATION
Install the wheel onto the hub with the tire valve fac-
ing out and the arrow mark facing in the normal
rotating direction.
NOTE:
Do not interchange the left and right tires.
Install the wheel nuts with the tapered side facing
inward and tighten them.
TORQUE:
(6.5 kgfm, 47 Ibftt)
64
REMOVAL
NOTE:
This service requires the Universal Bead Breaker
Remove and install the tire from the r i m side
Remove the core from the valve stem.
CAUTION
Use of the bead breaker tool is required for tire
removal.
Do not damage the bead seating area of the rim.
Use
Coats 220 Tire Changer or equivalent t o
remove the tire from the rim. If a tire changer is
not available, tire irons may be used, but take
care not to scratch the wheel.
Install the blade for 9/11" rims onto the breaker arm
assembly.
CAUTION:
Use of an improper size blade may result in damage
to the rim, tire or b/ade.
FRONT WHEEL/SUSPENSION/STEERlNG
I
PRESS BLOCK
I
\
BLADE
12-9