Remove the O-ring.
Remove the nuts, bolts and driven sprocket.
Remove the snap ring from the bearing holder.
Remove the caliper stay and stopper bushing.
Remove the O-rings from the bearing holder and stay
groove.
Remove the axle bearing holder to the left by tapping
it lightlyfrom the right side.
Remove the 0-rings from the holder grooves.
Remove the dust seals.
INSPECTION
Set the axle in V-blocks and measure the axle runout
with
a
dial indicator.
Actual runout is 112 the total indicator reading.
SERVICE LIMIT
3.0
REAR WHEELlSUSPENSlON
SPROCKET
\
SNAP
13-5
KING