Honda TRX400EX FOURTRAX 1999 Service Manual page 131

Install the lock washer with the "OUTSIDE" mark fac-
ing out.
Apply oil to the threads and seating surface of a new
clutch center lock nut and install it onto the mainshaft.
Hold the clutch center with the special tool and tighten
the lock nut.
TOOL
Clutch center holder
TORQUE: 108 N.m (11.0 k g f m 80 IbfW
Stake the clutch center lock nut into the mainshaft
groove.
damage the
mainshaft
threads.
Coat the clutch discs with clean engine oil.
Install the seven clutch discs and six plates alternately,
Install the
starting with the disc.
out-side clutch
disc tabs into the
shallow slots in
the clutch outer.
equivalent
commercially
available in U S A .
I
DISCS
9-9