Table 33: Operating Messages 2; 767-6402 4 Ai Rtd - WAGO 767-6402 Manual

66 Diagnostics
Pos : 41.7 /Serie 767 (WAGO-SPEED WAY)/Di agnose/I/O-Modul e/Betriebs mel dungen 767- 6402/-6403 F, I/O (Pos. 16 + 17) @ 5\mod_1249464070984_21.doc x @ 40418 @ @ 1

Table 33: Operating messages 2

Pos. LED Color/status
16 F
Ch1 –
Ch4
17
Er1 –
Er4
Pos : 41.8 /Serie 767 (WAGO-SPEED WAY)/Di agnose/I/O-Modul e/Betriebs mel dungen 767- xxxx U LS und UA (Pos. 18 + 19) @ 8\mod_1278577022948_21.doc x @ 59316 @ @ 1
18 U
A
19 U
LS
Pos : 42 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Cause
Red An undervoltage of < 18 V
of the actuator supply and/or
logic and sensor supply is
present.
Yellow The corresponding inputs are
ready for operation.
Off An undervoltage of < 18 V
of the logic and sensor
supply is present.
Red Measuring range exceeded
or underrun on the
corresponding input.
Off An undervoltage of
< 18 V of the logic and
sensor supply is present.
Green Actuator supply U
present.
Off Actuator supply U
present.
Green Logic supply and sensor
supply U
Off Logic supply and sensor
supply U
WAGO-SPEEDWAY 767
Remedy/information
Check the power supply of the
previous 767 component.
-
Check the power supply of the
previous 767 component.
Select the correct measuring
area for the input signal.
Check the power supply of the
previous 767 component.
is -
A
is not Connect the power supply and
A
check the voltage level, if
applicable.
-
are present.
LS
Connect the power supply and
are not present. check the voltage level, if
LS
applicable.

767-6402 4 AI RTD

Manual
Version 3.1.0