Removing The Module From The Profile Adapter; Connecting The Module; Disposal - WAGO 767-6402 Manual

WAGO-SPEEDWAY 767
767-6402 4 AI RTD
Pos : 54 /Serie 767 ( WAGO-SPEED WAY)/Ser vic e/I/O-M odule/Ser vic e 767- xxxx allgemein 4 @ 5\mod_1249471383765_21.doc x @ 40467 @ 332 @ 1
10.2.4

Removing the Module from the Profile Adapter

If the module is mounted on a profile adapter, proceed with the removal as
follows:
1. Disconnect the power supply from that part of the system on which you
have mounted the module before attempting to remove it.
2. Unscrew the screws on which the nuts are fastened and remove the module
from the profile rail of your system.
3. Unscrew the screws that connect the module with the profile adapter.
10.2.5

Connecting the Module

To connect the module, proceed as described in Sections 4 through 6. If
necessary, the parameters of the previous module are transferred to the new
module, depending on the type of fieldbus coupler being used. For more
information, see section "Parameterizing" > "Automatic Storage of System
Parameters".
10.3

Disposal

Do not dispose of the 767 Series components in the household waste; observe the
laws which apply to them. You can also contact a certified waste management
company.
Pos : 55 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 3.1.0
Service 69