Input Data; Table 30: Input Data In The Process Image - WAGO 767-6402 Manual

WAGO-SPEEDWAY 767
767-6402 4 AI RTD
Pos : 35 /Serie 767 ( WAGO-SPEED WAY)/Proz ess abbild/I/O-Module/Proz ess abbil d 767-6402 Ei ngangsdaten @ 5\mod_1249371475296_21.doc x @ 40183 @ 2 @ 1
8.1

Input Data

The image for the process data, which are sent from the I/O module to the fieldbus
coupler, has a size of 8 bytes. If you configure synchronous diagnostic data for the
I/O module, the process image has a size of 11 bytes.
The diagnostic message is structured as follows:

Table 30: Input data in the process image

Byte 0
Byte 1
Byte 2
Byte 3
Byte 4
Byte 5
Byte 6
Byte 7
Manual
Version 3.1.0
15
\
------------------- -------------------
\/
8 data bits (signed integer value)
7
\
------------------- -------------------
\/
8 data bits (signed integer value)
15
\
------------------- -------------------
\/
8 data bits (signed integer value)
7
\
------------------- -------------------
\/
8 data bits (signed integer value)
15
\
------------------- -------------------
\/
8 data bits (signed integer value)
7
\
------------------- -------------------
\/
8 data bits (signed integer value)
15
\
------------------- -------------------
\/
8 data bits (signed integer value)
7
\
------------------- -------------------
\/
8 data bits (signed integer value)
Process Image
8
Measured value channel 1
/
0
Measured value channel 1
/
8
Measured value channel 2
/
0
Measured value channel 2
/
8
Measured value channel 3
/
0
Measured value channel 3
/
8
Measured value channel 4
/
0
Measured value channel 4
/
61