Figure 17: Connectors M12 (Exemplary); 767-6402 4 Ai Rtd - WAGO 767-6402 Manual

WAGO-SPEEDWAY 767

767-6402 4 AI RTD

Pos : 23.23 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlus s_Sens oren 767- 38xx, 64xx allgemei n @ 5\mod_1249297832343_21.doc x @ 39987 @ @ 1
To connect the sensors to the digital inputs, proceed as follows:
1. Disconnect the power supply from those devices on which you have
mounted the module.
2. Insert the sensor cable plug into an input socket (3) on the module, and
tighten it via knurled-head screw.
3. Screw a protective cap on all unused ports to ensure that IP67 degree of
protection is provided.
Pos : 23.24 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlüs se_4xM12_Sensor en/Aktor en - Bil d @ 5\mod_1249293750953_21.doc x @ 39979 @ @ 1
3

Figure 17: Connectors M12 (exemplary)

Pos : 24 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 3.1.0
Connecting Data and Supply Cables
3
47