Setting Sounds; Speaker Volume - Dell 1600n User Manual

Setting Sounds

You can control the following sounds:
•
•
•
•
Speaker, Ringer, Key Sounds and Alarm Sounds
1
2
3
4
5
6

Speaker Volume

NOTE: You can adjust the speaker volume only when the telephone line is connected.
1
2
3
11 4
Faxing
Speaker: You can turn on or off the sounds from the telephone line through the
speaker, such as a dial tone or a fax tone. When this option set to Com, the speaker is
on until the remote machine answers.
Ringer: You can adjust the ringer volume.
Key Sound: When this option set to On, a key tone sounds each time any key is
pressed.
Alarm Sound: You can turn the alarm sound on or off. When this option set to On, an
alarm tone sounds when an error occurs or fax communication ends.
You can adjust the speaker volume level using the <On Hook Dial> button.
Press <Menu> until "Sound/Volume" appears on the top line of the display.
Press the scroll button ( or ) to scroll through the options. Press <Select> when
you see the sound option you want.
Press the scroll button ( or ) to display the status or loudness you want for the
option you have selected.
For the ringer volume, you can select from "Off", "Low", "Med" and "High". Setting
"Off" means that the ringer turns off. The machine works normally even if the ringer
is turned off.
Press <Select> to save the selection.
If necessary, repeat steps 2 through 4.
To return to Standby mode, press <Return>.
Press <On Hook Dial>. A dial tone sounds from the speaker.
Press the scroll button ( or ) until you hear the loudness you want. The display
shows the current volume level.
Press <On Hook Dial> to save the change and return to Standby mode.