Setting Sounds; Speaker, Ringer, Dial Tone, Fault, Conflict, And Selection; Toll Save Mode - Dell 2355 Mono Laser User Manual

Setting Sounds

Speaker, Ringer, Dial Tone, Fault, Conflict, and Selection

Press Setup
1
Press the Next (
2
Press the up/down arrows to select Initial Setup.
3
Press the up/down arrows to select Sound & Volume.
4
Press the up/down arrows to select the appropriate option you want.
5
•
•
•
•
•
•
Press the home icon (
6

Toll Save Mode

The Toll Save mode can be used to save scanned documents for transmission at a specified
time in order to take advantage of lower long distance rates.
To turn the Toll Save mode on:
Press Setup
1
Press the Next (
2
Press the up/down arrows to select Fax Setup.
3
Press the up/down arrows to select Toll Save.
4
Press the left/right arrows to display On.
5
Select the Start Time and End Time each using the up/down arrows.
6
184
Machine Setup from the home screen.
) button.
Speaker: Turns On or Off the sounds from the telephone line through the speaker,
such as a dial tone or a fax tone. With this option set to Comm. which means
Comm., the speaker is on until the remote machine answers.
Ringer: Adjusts the ringer volume. For the ringer volume, you can select Off, Low,
Med, and High.
Dial Tone: Adjusts the dial tone volume. For the dial tone volume, you can select
1-7.
Fault: Adjusts the 'error occurs' volume. For the error volume, you can select Off,
Low, Med, and High.
Conflict: Adjusts the conflict volume. For the error volume, you can select Off, Low,
Med, and High.
Selection: You can set the selection volume for when pressing the button, you can
select Off, Low, Med, and High.
) to return to the Standby mode.
Machine Setup from the home screen.
) button.