Dell 1600n User Manual page 53

CAUTION: Make sure to open the rear output slot when you print on
transparencies. If not, they may tear while exiting the machine.
For envelopes, load a sheet with the flap side face down and with the stamp area on
the top left side. The end of the envelope with the stamp area enters the Bypass tray
first.
NOTICE: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-stick
adhesives. These envelopes may severely damage the machine. The stamp is shown in the
illustration only for placement.
Adjust the paper guide to the width of the print material.
2
The machine picks up the material from the tray and begins printing.
NOTE: When printing on previously printed paper from
the Bypass tray, the printed side should be facing down
with an uncurled edge to the machine. If you experience
problems with paper feed, turn the paper around.
55
Pa p e r H a n d l i ng