Ccd Power Save Mode - Dell 1600n User Manual

Power Save Mode
The Power Save mode allows your machine to reduce power consumption when it is not in
actual use. You can turn this mode on by selecting the length of time for which the machine
waits after a job is printed before it switches to a reduced power state.
1
2
3
4
5
6
7

CCD Power Save Mode

The scan lamp under the scanner glass automatically turns off when it is not in actual use
during a preset period to reduce power consumption and extend the lamp life. The lamp
automatically turns-on and the warm-up cycle begins whenever any key pressed or the
document cover is opened or a document is deleted in the ADF.
You can set the length of time for which the scan lamp waits after a scan job is completed
before it switches to the Power Save mode.
1
2
3
4
5
26
Press <Menu> until "Printer Setup" appears on the top line of the display.
Press the scroll button ( or ) until "Power Save" appears on the bottom line.
Press <Select>.
Press the scroll button ( or ) to display "On" on the bottom line and press
<Select>.
Selecting "Off" means that the Power Save mode is turned off.
Press the scroll button ( or ) until the time settings you want appears.
The available options are 5, 10, 15, 30 and 45 (minutes).
Press <Select> to save the selection.
To return to Standby mode, press <Return>.
Press <Menu> until "Printer Setup" appears on top line of the display.
Press the scroll button ( or ) until "CCD Power Save" appears on the bottom
line. Press <Select>.
Press the scroll button ( or ) until the time setting you want appears on the bottom
line.
The available time options are 1, 4, 8, and 12 (hours).
Press <Select> to save the selection.
To return to Standby mode, press <Return>.