Changing The Clock Mode; Setting Sounds; Speaker Volume - Dell 1600n Multifunction Mono Laser Printer User Manual

5.
NOTE: The multi-function printer beeps and does not allow you to proceed to the next step if a wrong
number is entered.

Changing the Clock Mode

You can set your multi-function printer to display the current time using either the 12-hour or the 24-hour
format.
1. Press <Menu> until "Printer Setup" appears on the top line of the display.
2. Press the scroll button ( or
The multi-function printer displays the Clock mode that is currently set.
3. Press the scroll button ( or
selection.
4. To return to Standby mode, press <Return>.

Setting Sounds

Speaker, Ringer, Key Sounds and Alarm Sounds
1. Press <Menu> until "Sound/Volume" appears on the top line of the display.
2. Press the scroll button ( or
option you want.
3. Press the scroll button ( or
selected.
For the ringer volume, you can select from "Off", "Low", "Med" and "High". Setting "Off" means that
the ringer turns off. The multi-function printer works normally even if the ringer is turned off.
4. Press <Select> to save the selection.
5. If necessary, repeat steps 2 through 4.
6. To return to Standby mode, press <Return>.

Speaker Volume

1.
) until you see "Clock Mode" on the bottom line and press <Select>.
) to select the other mode and then press <Select> to save the
) to scroll through the options. Press <Select> when you see the sound
) to display the status or loudness you want for the option you have