Toll Save Mode - Dell 1600n User Manual

Toll Save Mode

Using the Toll Save mode, you can set your machine so all the document prescanned
throughout the day are sent during a preset time slot, when the call charge is lowered. This
Toll Save mode helps you to take advantage of lower long distance rates at night, for
example.
NOTE: The toll-saving time slot may vary depending on your contract with a long distance phone
company.
To turn the Toll Save mode on:
Press <Menu> until "Advanced Fax" appears on the top line of the display.
1
Press the scroll button ( or ) until you see "Toll Save"on the bottom line and
2
press <Select>.
Press the scroll button ( or ) until "On" displays on the bottom line and press
3
<Select>.
Press <Select> when "Start Time" displays on the bottom line.
4
Enter the time when your machine starts sending toll save faxes, using the number
5
keypad.
To select "AM" or "PM" for 12-hour format by pressing the asterisk (
( ) button.
Press <Select> when the starting time on the display is correct.
6
Press the scroll button ( or
7
Enter the time when the toll save transmission ends, using the number keypad.
8
Press <Select> to save the setting.
9
To return to Standby mode, press <Return>.
10
Once Toll Save mode is activated, your machine stores all of the documents to be faxed into
its memory and sends them at the programmed time.
To turn Toll Save mode off, follow steps 1 and 2 above and then press the scroll button ( or
) until "Off" displays at the bottom line and press <Select>.
) to display "End Time" and press <Select>.
) or the sharp
Faxing
115