Poster Copying - Dell 1600n User Manual

2-up or 4-up Copying
The 2 or 4-up copying feature is available only when you load documents in the ADF.
NOTE: You cannot adjust the copy size using the <Reduce/Enlarge> (▼or ▲) button for
making a 2 or 4-up copy.
NOTE: 2-up copy reduces your original document by 50 percent. 4-up copy reduces the
document by the following rates depending on the paper loaded: 76 percent for Letter, 81
percent for A4 and 95 percent for Legal.
To make the 2 or 4-up copying:
Load the documents to be copied in the ADF.
1
Press <Layout>.
2
Press <Layout> or the scroll button ( or ) until "2 Up" or "4 Up" displays on the
3
bottom line.
Press <Select> to save the selection.
4
If necessary, customize the copy settings including the number of copies, contrast, and
5
image quality by using the operator panel buttons. See "Setting Copy Options" on
page 88.
Press <Start Copy> to begin copying.
6

Poster Copying

This special copy mode can be applied when you load a document using only the scanner
glass. If a document is detected in the ADF, the Poster copying feature does not work.
NOTE: You cannot adjust the copy size using the <Reduce/Enlarge> button for making a
poster.
To make the Poster copying:
Load the documents to be copied on the scanner glass and close the cover.
1
Press <Layout>.
2
Press <Layout> or the scroll button ( or ) until "Poster" displays on the bottom
3
line.
Press <Select> to save the selection.
4
If necessary, customize the copy settings including the number of copies, contrast, and
5
image quality by using the operator panel buttons. See "Setting Copy Options" on
page 88.
▲ 2-up copying
1 2
3 4
▲ 4-up copying
93
Copying