Dell 1600n User Manual page 23

Connect a USB cable to the USB connector on your printer.
2
Plug the other end of the cable into a USB port on the back of the computer, not the
3
USB keyboard.
Connecting the Printer to the Network
Make sure the printer, computer, and any other attached devices are turned off and
1
unplugged.
Plug one end of the Ethernet cable into the Ethernet network port on the printer.
2
Plug the other end of the cable into a network LAN drop or hub. The printer
3
automatically adjusts for the network speed.
NOTE: After connecting the printer you need to configure the network parameters on the
operator panel. See page 143.
23