AudioCodes Mediant 500 E-SBC User Manual page 910

Parameter
CLI: search-dns-in-parallel
[LDAPSearchDNsinParalle
l]
Web: LDAP Search Server
Method
CLI: ldap-search-server-
method
[LDAPSearchServerMetho
d]
Web: LDAP Authentication
Filter
CLI: configure voip > ldap >
auth-filter
[LDAPAuthFilter]
Web: Use LDAP for
Web/Telnet Login
CLI: configure voip > ldap >
enable-mgmt-login
[MgmtLDAPLogin]
[LDAPDebugMode]
Web: MS LDAP OCS
Number attribute name
EMS: LDAP ocs Number
Attribute Name
CLI: ldap-ocs-nm-attr
[MSLDAPOCSNumAttribut
eName]
Web: MS LDAP PBX
Number attribute name
CLI: ldap-pbx-nm-attr
[MSLDAPPBXNumAttribut
eName]
Web: MS LDAP MOBILE
Number attribute name
CLI: ldap-mobile-nm-attr
[MSLDAPMobileNumAttri
buteName]
User's Manual
Defines the method of how the device queries the DN object within
each LDAP server.

[0] Sequential = (Default) The query is done in each DN object,
one by one, until a result is returned.

[1] Parallel = The query is done in all DN objects at the same
time.
Defines the method of how the device queries between two LDAP
severs.

[0] Sequential = The device first queries one of the LDAP
servers, and if the DN object is not found, it queries the second
LDAP server.

[1] Parallel = (Default) The device queries the LDAP servers at
the same time.
Defines the LDAP search filter attribute for searching the login
username in the directory's subtree for LDAP-based user
authentication and authorization.
You can use the dollar ($) sign to represent the username. For
example, if this parameter is set to "(sAMAccountName=$)" and the
user logs in with the username "SueM", the LDAP query is run for
sAMAccountName=SueM.
Enables LDAP-based management-user login authentication and
authorization.

[0] Disable (default)

[1] Enable
Note: For this parameter to take effect, a device reset is required.
Determines whether to enable the LDAP task debug messages.
This is used for providing debug information regarding LDAP tasks.
The valid value range is 0 to 3. The default is 0.
Defines the name of the attribute that represents the user's Lync
number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default is
"msRTCSIP-PrimaryUserAddress".
Defines the name of the attribute that represents the user PBX
number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default is
"telephoneNumber".
Defines the name of the attribute that represents the user Mobile
number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default is
"mobile".
910
Description
Document #: LTRT-10437
Mediant 500 E-SBC