Resetting Channels; Restarting A B-Channel - AudioCodes Mediant 500 E-SBC User Manual

User's Manual
37

Resetting Channels

37.1

Restarting a B-Channel

You can restart a specific B-channel belonging to an ISDN or CAS trunk, using the SNMP
MIB variable, acTrunkISDNCommonRestartBChannel or the EMS management tool (refer
to the EMS User's Manual). This may be useful, for example, for troubleshooting specific
voice channels.
Notes:
•
If a voice call is currently in progress on the B-channel, it is disconnected when the
B-channel is restarted.
•
B-channel restart can only be done if the D-channel of the trunk to which it
belongs is synchronized (Layer 2).
•
B-channel restart does not affect the B-channel's configuration.
Version 6.8 547
37. Resetting Channels
Mediant 500 E-SBC