Fixed Mapping Of Sip Response To Isdn Release Reason - AudioCodes Mediant 500 E-SBC User Manual

User's Manual
Table 23-7: Release Cause Mapping Tables Parameter Descriptions
Parameter
Index
[CauseMapSip2Isdn_Index]
[CauseMapIsdn2Sip_Index]
Sip Response
CLI: sip-response
[CauseMapSip2Isdn_SipResponse]
[CauseMapIsdn2Sip_SipResponse]
Q.850 Causes
CLI: q850-causes
[CauseMapSip2Isdn_IsdnReleaseCause]
[CauseMapIsdn2Sip_IsdnReleaseCause]

23.8.1 Fixed Mapping of SIP Response to ISDN Release Reason

The following table describes the mapping of SIP response to ISDN release reason.
Table 23-8: Mapping of SIP Response to ISDN Release Reason
SIP Response
400* Bad request
401 Unauthorized
402 Payment required
403 Forbidden
404 Not found
405 Method not allowed
406 Not acceptable
407 Proxy authentication required
408 Request timeout
409 Conflict
410 Gone
411 Length required
413 Request entity too long
414 Request URI too long
415 Unsupported media type
420 Bad extension
480 Temporarily unavailable
Call leg/transaction doesn't
481*
exist
482* Loop detected
483 Too many hops
Version 6.8
Defines an index number for the new table record.
Defines the SIP response code (e.g., 406).
Defines the ISDN Q.850 cause code (e.g., 6).
Description
Description
ISDN Release
Reason
31 Normal, unspecified
21 Call rejected
21 Call rejected
21 Call rejected
1 Unallocated number
63 Service/option unavailable
79 Service/option not implemented
21 Call rejected
102 Recovery on timer expiry
41 Temporary failure
22 Number changed w/o diagnostic
127 Interworking
127 Interworking
127 Interworking
79 Service/option not implemented
127 Interworking
18 No user responding
127 Interworking
127 Interworking
127 Interworking
379
23. Manipulation
Description
Mediant 500 E-SBC