AudioCodes Mediant 500 E-SBC User Manual page 875

User's Manual
Parameter
Web: Set IP-to-TEL Redirect
Reason
CLI: ip2tel-redir-reason
[SetIp2TelRedirectReason]
Web: Set TEL-to-IP Redirect
Reason
CLI: tel2ip-redir-reason
[SetTel2IpRedirectReason]
Web: Send Screening
Indicator to IP
EMS: Screening Indicator To
IP
[ScreeningInd2IP]
Web: Send Screening
Indicator to ISDN
EMS: Screening Indicator To
ISDN
Version 6.8

[3] Network Provided
Note: This parameter is applicable only to digital PSTN interfaces
(ISDN).
Defines the redirect reason for IP-to-Tel calls. If redirect (diversion)
information is received from the IP, the redirect reason is set to the
value of this parameter before the device sends it on to the Tel.

[-1] Not Configured (default)

[0] Unkown

[1] Busy

[2] No Reply

[3] Network Busy

[4] Deflection

[9] DTE out of Order

[10] Forwarding DTE

[13] Transfer

[14] PickUp

[15] Systematic/Unconditional
Note: This parameter is applicable only to digital PSTN interfaces
(ISDN).
Defines the redirect reason for Tel-to-IP calls. If redirect (diversion)
information is received from the Tel, the redirect reason is set to the
value of this parameter before the device sends it on to the IP.

[-1] Not Configured (default)

[0] Unkown

[1] Busy

[2] No Reply

[3] Network Busy

[4] Deflection

[9] DTE out of Order

[10] Forwarding DTE

[13] Transfer

[14] PickUp

[15] Systematic/Unconditional
Note: This parameter is applicable only to digital PSTN interfaces
(ISDN).
Overrides the calling party's number (CPN) screening indication in
the received ISDN SETUP message for Tel-to-IP calls.

[-1] Not Configured = (Default) Not configured (interworking from
ISDN to IP) or set to 0 for CAS.

[0] User Provided = CPN set by user, but not screened (verified).

[1] User Passed = CPN set by user, verified and passed.

[2] User Failed = CPN set by user, and verification failed.

[3] Network Provided = CPN set by network.
Note: This parameter is applicable only if the Remote Party ID
(RPID) header is enabled.
Overrides the screening indicator of the calling party's number for IP-
to-Tel ISDN calls.

[-1] Not Configured = (Default) Not configured (interworking from
875
54. Configuration Parameters Reference
Description
Mediant 500 E-SBC