AudioCodes Mediant 500 E-SBC User Manual page 52

In addition to the color-coded status information depicted on the graphical display of the
device, the Home page displays various read-only information in the General Information
pane:

IP Address: IP address of the device

Subnet Mask: Subnet mask address of the device

Default Gateway Address: Default gateway used by the device

Digital Port Number: Number of digital PRI ports (depending on ordered hardware
configuration)

Firmware Version: Software version running on the device

Protocol Type: Signaling protocol currently used by the device (i.e. SIP)

Gateway Operational State:
•
"LOCKED": device is locked (i.e. no new calls are accepted)
•
"UNLOCKED": device is not locked
•
"SHUTTING DOWN": device is currently shutting down
To perform these operations, see ''Basic Maintenance'' on page 539.

High Availability: Status of the device's HA mode (see HA Status on the Home Page
on page 525).
The table below describes the areas of the Home page.
Item #
1 Displays the highest severity of an active alarm raised (if any) by the device:

Green = No alarms

Red = Critical alarm

Orange = Major alarm

Yellow = Minor alarm
To view active alarms, click the Alarms area to open the Active Alarms page (see
Viewing Active Alarms on page 607).
2 Status LED.
3 USB port for USB storage services.
4 RS-232 interface port (RJ-45).
5 Module number for the interface type.
6 Gigabit Ethernet LAN port status icons:



To view detailed port information, click the port icon (see Viewing Ethernet Port
Information on page 606).
7 Interface module name.
8 E1/T1 port (trunk or channel) status icon.
Icon
(gray)
User's Manual
Table 6-7: Home Page Description
(green): Link is working
(gray): Link is not configured
(red): Link error
Disable: Trunk not configured (not in use)
Description
Trunk Description
52
Mediant 500 E-SBC
Document #: LTRT-10437