AudioCodes Mediant 500 E-SBC User Manual page 328

Parameter
Web: Jitter Compensation
CLI: sbc-jitter-compensation
[IpProfile_SBCJitterCompensation]
User's Manual
Enables the on-demand jitter buffer for SBC calls. This jitter
buffer can be used when other functionality such as voice
transcoding are not done on the call. This jitter buffer is
useful when incoming packets are received at inconsistent
intervals (i.e., packet delay variation). The jitter buffer stores
the packets and sends them out at a constant rate
(according to the coder's settings).

[0] Disable (default)

[1] Enable
Notes:

The jitter buffer parameters, 'Dynamic Jitter Buffer
Minimum Delay' (DJBufMinDelay) and 'Dynamic Jitter
Buffer Optimization Factor' (DJBufOptFactor) can be
used to configure minimum packet delay only when
transcoding is employed.

This functionality may require DSP resources. For more
information, contact your AudioCodes sales
representative.
328
Mediant 500 E-SBC
Description
Document #: LTRT-10437