AudioCodes Mediant 500 E-SBC User Manual page 895

User's Manual
Parameter
video-coders-group group-X
[AllowedVideoCodersGroupX]
Classification Table
Web: Classification Table
EMS: SBC Classification
CLI: configure voip > sbc routing
classification
[Classification]
Condition Table
Web: Condition Table
CLI: configure voip > sbc routing
condition-table
[ConditionTable]
SBC IP-to-IP Routing Table
Web: IP-to-IP Routing Table
EMS: IP to IP Routing
CLI: configure voip > sbc routing
ip2ip-routing
[IP2IPRouting]
Version 6.8
which determine the video coders that can be used for a
specific SIP entity.
The format of the ini file table parameter is as follows:
[AllowedVideoCodersGroup0]
FORMAT AllowedVideoCodersGroup_Index =
AllowedVideoCodersGroup_Name;
[\AllowedVideoCodersGroup]
Where X represents the index number.
For a detailed description of this table, see ''Configuring Allowed
Video Coder Groups'' on page 479.
This table parameter configures the Classification table. This
table classifies incoming SIP dialogs to Source IP Groups. The
format of the ini file table parameter is as follows:
[ Classification ]
FORMAT Classification_Index =
Classification_ClassificationName,
Classification_MessageCondition, Classification_SrcSRDID,
Classification_SrcAddress, Classification_SrcPort,
Classification_SrcTransportType,
Classification_SrcUsernamePrefix, Classification_SrcHost,
Classification_DestUsernamePrefix, Classification_DestHost,
Classification_ActionType, Classification_SrcIPGroupID;
[ \Classification ]
For a detailed description of this table, see ''Configuring
Classification Rules'' on page 480.
This table parameter configures Message Condition rules for
SIP messages.
[ ConditionTable ]
FORMAT ConditionTable_Index = ConditionTable_Condition,
ConditionTable_Description;
[ \ConditionTable ]
For a detailed description of this table, see ''Configuring
Message Condition Rules'' on page 486.
This table parameter configures the SBC IP-to-IP Routing table
for routing incoming SIP messages such as INVITE messages
to an IP destination. The format of the ini file table parameter is
as follows:
[ IP2IPRouting ]
FORMAT IP2IPRouting_Index = IP2IPRouting_RouteName,
IP2IPRouting_SrcIPGroupID,
IP2IPRouting_SrcUsernamePrefix, IP2IPRouting_SrcHost,
IP2IPRouting_DestUsernamePrefix, IP2IPRouting_DestHost,
IP2IPRouting_RequestType, IP2IPRouting_MessageCondition,
IP2IPRouting_ReRouteIPGroupID, IP2IPRouting_Trigger,
IP2IPRouting_CallSetupRulesSetId, IP2IPRouting_DestType,
IP2IPRouting_DestIPGroupID, IP2IPRouting_DestSRDID,
IP2IPRouting_DestAddress, IP2IPRouting_DestPort,
IP2IPRouting_DestTransportType,
895
54. Configuration Parameters Reference
Description
Mediant 500 E-SBC