Table of Contents
Advertisement
4.6.2
Setting the date and time
You can use this function to set the date and time. The HMI device has an internal buffered
clock.
Requirement
You have opened the "Date/Time Properties" dialog with the "Date/Time" icon.
①
②
③
④
⑤
Procedure
1. Select the applicable time zone for the HMI device from the "Time Zone" selection box.
2. Select "Apply".
The time of day shown in the "Current Time" box is adjusted correspondingly to the
selected time zone.
3. Set the date in the selection box.
4. Set the current time of day in the "Current Time" text box.
5. Select "Apply".
The entry is made.
Note
The system does not automatically switch between standard time and daylight saving
time.
6. If you want to switch from winter to summer time, select the
"Daylight savings time currently in effect" check box.
Pressing "Apply" sets the time forward by one hour.
7. If you want to switch from summer to winter time, clear the
"Daylight savings time currently in effect" check box.
Pressing "Apply" sets the time back by one hour.
8. Confirm your entries.
The dialog closes.
Mobile Client900RXA
Operating Instructions, 07/2015, A5E36360099-AA
Date selection box
Text box for the time
Time zone selection box
Check box used to activate daylight saving time
Button for applying changes
Parameter assignment of a Mobile Client
4.6 General settings
63
Advertisement
Table of Contents
