Remote Controller Servicing Functions - Panasonic S-36PU1E5A Service Manual

7-7. Remote Controller Servicing Functions

• The remote controller includes a number of servicing functions. Use these as needed for test runs and inspections.
■ Timer Remote Controller CZ-RTC2
Fig. 7-5
List of Servicing Functions
Functions Description
Operation with forced
Test run
thermostat ON
Sensor
Temperature display
temperature
from each sensor
display
Servicing
Alarm history display
check display
Filter lifetime, operating
Simple mode priority, central
settings control address, and
other settings
System address, indoor
Detailed unit address, central
settings control address, and
other settings
Automatic address
Automatic setting based on
address command from the
wired remote controller
Address Change of indoor unit
change address
CZ-RTC2
Button operation
Press and hold the button for 4
seconds or longer.
Press and hold the and
buttons for 4 seconds or longer.
Press and hold the and
buttons for 4 seconds or longer.
Press and hold the and
buttons for 4 seconds or longer.
Press and hold the ,
buttons for 4 seconds or longer.
Press and hold the and the
timer operation buttons for 4
seconds or longer.
Press and hold the and the
timer operation buttons for 4
seconds or longer.
7-17
Reset operation
Press the
button.
and
Automatic reset
Press the
button.
Unit status
Current operation is
maintained.
When settings
are made from a
remote controller,
the indoor unit
where that remote
controller is
connected stops.
Entire system
stops.
7