Panasonic S-36PU1E5A Service Manual page 369

CAUTION
The indoor unit should be slightly tilted downward toward
the drain pipe connection side as shown in figure below
so that the wastewater can flow smoothly without being
trapped in the middle. (Fig. 1-51)
Ceiling
Diagonally right down (front view)
(Ex.: Diagonal-right-backwards)
Ceiling
Diagonally backward (side view)
2-7. Final Procedure
Reinstall the removed part to be placed in its original position.
(See the section "2-2. Preparation Before Installation".)
Then install the accessory supplied side covers (L/R) on both
sides of the indoor unit.
Attach the supplied side plates.
Slide the covers from the front side and attach to the claws
of the latches.
Tighten the screws (supplied).
Attach the accessory supplied side covers.
Insert the side plates in the direction of the arrow and fix
them with 2 screws once you've removed.
Approx. 1°
Approx. 2°
Fig. 1-51
Side plate
Screw
Attach
Side cover (accessory supplied)
Screw (accessory supplied)
Fig. 1-52
Attach the air-intake grille.
When attaching the air-intake grille, perform the reverse
procedure to removing the grille.
Refer to the section "2-2. Preparation Before Installation".
Be sure to attach the safety string.
Close the air-intake grille and fix the claws of the latches
with the screws.
(Ceiling)
Part Name Figure
Special
washer
Drain
insulator
Flare
insulator
Clamper
Full-scale
installation
diagram
Drain hose
Hose band
Side
cover (R)
Side
cover (L)
Screw
Operating
Instructions
Installation
Instructions
1-359
Safety string
Fig. 1-53
Q'ty Remarks
For temporarily suspending
4
indoor unit from ceiling
2 For drain hose joint
1 For gas tube joint
1 For liquid tube joints
For flare insulator
6
and wiring
For positioning
1
installation
For main unit + PVC
1
pipe joints
For drain hose
1
connection
(Packed in carton box)
1
For right side
(Packed in carton box)
1
For left side
2 For side cover (L/R)
1
1
1