Remote Controller Servicing Functions - Panasonic U-4LE2E5 Service Manual & Test Run Service Manual

3. Remote Controller Servicing Functions

3. Remote Controller Servicing Functions
The remote controller includes a number of servicing functions. Use these as needed for test runs and
inspections.
<Function of CZ-RTC5A / CZ-RTC5B>
Display of "maintenance function" screen
Keep pressing the
1
buttons simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the
LCD display.
Press the
2
menu.
If you wish to see the next screen instantly, press
the or
List of Servicing Functions
Functions
ECONAVI
・CZ-KPU3A
・CZ-CENSC1
Test run
Sensor temperature
display
Servicing check
display
5
Simple settings
Detailed settings
Automatic address
nanoe™ X
(CZ-RTC5A /
CZ-RTC5B only)
, and
or button to see each
button.
Description
Display from each sensor
Operation with forced
thermostat ON
Temperature display from
each sensor
Alarm history display
Filter lifetime, operating
mode priority, central control
address, and other settings
System address, indoor
unit address, central control
address, and other settings
Automatic address setting
based on command from the
wired remote controller
Display status of nanoe™ X
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4.Test run
Sel.
Menu selection Reset operation
0. ECONAVI info.
4. Test run
Press the
button.
5. Sensor info
6. Service check
7. Simple settings
Press the
button.
(Restart)
8. Detailed settings
9. Auto address Automatic reset
Press the
13. nanoe
button.
5 - 18
Mini VRF SYSTEM
Remote Controller Functions
2WAY SYSTEM
Remote Controller Functions
20:30 (THU)
Page [ ] Confirm
Unit status
When settings are
made from a remote
controller, the indoor
unit where that
remote controller is
connected stops.
Entire system stops.