Remote Controller Servicing Functions - Panasonic U-8ME2E8 Service Manual & Test Run Service Manual

3. Remote Controller Servicing Functions

3. Remote Controller Servicing Functions
The remote controller includes a number of servicing functions. Use these as needed for test runs and
inspections.
<Function of CZ-RTC5A>
Display of "maintenance function" screen
1 Keep pressing the
buttons simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the
LCD display.
2 Press the or
menu.
If you wish to see the next screen instantly, press
the or button.
List of Servicing Functions
Functions
Operation with forced
Test run
thermostat ON
Sensor temperature Temperature display from
display each sensor
Servicing check
Alarm history display
display
Filter lifetime, operating
mode priority, central control
Simple settings
address, and other settings
System address, indoor
unit address, central control
Detailed settings
address, and other settings
Auto address setting based
on command from the wired
Auto address
remote controller
, and
button to see each
Description
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4.Test run
Sel.
Menu selection Reset operation
4. Test run
Press the
5. Sensor info
button.
6. Service check
7. Simple settings
Press the
button.
(Restart)
8. Detailed settings
9. Auto address Automatic reset
5 - 21
2WAY SYSTEM
Remote Controller Functions
2WAY SYSTEM
Remote Controller Functions
20:30 (THU)
Page [ ] Confirm
Unit status
When settings are
made from a remote
controller, the indoor
unit where that
remote controller is
connected stops.
Entire system stops.
5