Mitsubishi Electric M700V Series Programming Manual page 314

13. Program Support Functions
(2) Argument designation II
Format : A__ B__ C__ I__ J__ K__ I__ J__ K__• • • •
Detailed description
(a) In addition to address A, B and C, up to 10 groups of arguments with I, J, K serving as 1
group can be designated.
(b) When the same address is duplicated, designate the addresses in the specified order.
(c) Addresses which do not need to be designated can be omitted.
(d) The following table shows the correspondence between the addresses which can be
designated by argument designation II and the variable numbers in the user macro main
body.
Argument
designation II
(Note 1) The numbers 1 through 10 accompanying I, J and K denote the sequence of the
(Note 2) With the M2/M0 format-label O type, the address "A" is used as the address for
(3) Using arguments designations I and II together
If addresses corresponding to the same variable are commanded when both types I and
II are used to designate arguments, the latter address is valid.
(Example 1)
Call instruction
Variable
#1 :
#2 :
#4 :
#5 :
#6 :
#7 :
In the above example, the last I7.7 argument is valid when both arguments D3.3 and I7.7
are commanded for the #7 variable.
Variable within
macro
address
A # 1
B # 2
C # 3
I1 # 4
J1 # 5
K1 # 6
I2 # 7
J2 # 8
K2 # 9
I3 #10
J3 #11
K3 #12
I4 #13
J4 #14
K4 #15
I5 #16
commanded groups and they are not required for the actual instructions.
subprogram No., thus, "A" can not be used as the local variable No.
G65 A1.1
1.1
–2.2
4.4
3.3
13.5 User Macro Specifications
Argument
designation II
address
J5
K5
I6
J6
K6
I7
J7
K7
I8
J8
K8
I9
J9
K9
I10
J10
K10
B-2.2 D3.3
302
Variable within
macro
#17
#18
#19
#20
#21
#22
#23
#24
#25
#26
#27
#28
#29
#30
#31
#32
#33
I4.4 I7.7 ;
7.7