High-Speed High-Accuracy Control; G05, G05.1; High-Speed High-Accuracy Control I, Ii - Mitsubishi Electric M700V Series Programming Manual

13. Program Support Functions

13.17 High-speed High-accuracy Control; G05, G05.1

13.17.1 High-speed High-accuracy Control I, II

Function and purpose
This function runs a machining program that approximates a freely curved surface with fine
segments at high speed and high accuracy. This is effective in increasing the speed of machining
dies of a freely curved surface.
Simultaneous 3-axis fine segment capacity for 1mm segment
High-speed
high-accuracy control I
Invalid
Command format
G05.1 Q1 ; ........ High-speed high-accuracy control I ON
G05.1 Q0 ; ........ High-speed high-accuracy control I OFF
G05 P10000 ; ... High-speed high-accuracy control II ON
G05 P0 ; ........... High-speed high-accuracy control II OFF
(Note 1) The high-speed high-accuracy mode l and II can not be used at the same time.
(Note 2) G05.1 Q1 (high-speed high-accuracy mode I) and G05 P10000 (high-speed
Performance of the fine segment execution
Without radius
compensation
mode
16.8m/min
Valid 33.6m/min
high-accuracy mode II) are valid when the parameter "#1267 ext03/bit0" is ON.
13.17 High-speed High-accuracy Control; G05, G05.1
With radius
compensation
16.8m/min
33.6m/min
422
Restriction in the program
No
Yes