Mitsubishi Electric M700V Series Programming Manual page 174

12. Tool Compensation Functions
Tool compensation memory
There are two types of tool compensation memories for setting and selecting the tool
compensation amount. (The type used is determined by the machine maker specifications.)
The compensation amount settings are preset with the setting and display unit.
Type 1 is selected when parameter "#1037 cmdtyp" is set to "1", and type 2 is selected when set to
"2".
Type of tool
compensation
memory
Type 1
Type 2
Classification of
length compensation,
radius compensation
Not applied
Applied
Shape
Wear
amount
Tool radius
compensation
Reference
Reference
tool
Shape
Tool length
compensation
Wear amount
162
12.1 Tool Compensation
Classification of
shape compensation,
wear compensation
Not applied
Applied