Process Data Mapping; Output Process Data (Manager => Client) - KEB COMBIVERT G6 Programming Manual

4 Process Data Mapping

The setting of the process data assignment is possible via the KEB-specific parameters
(fb10-fb19). After successful adjustment of the process data mapping the process data
can be processed by the G6 device.
After loading of the default values, a standard process data mapping is already set. The
number of each mapped parameters (fb14, fb19) has to be written once (default value
2) to activate the process data. Then the numbers are stored non-volatile.
In addition, the IO-link master must release the output process data via the master
command (value 0x98).
4.1 Output process data (manager => client)
Id-Text Name
fb10 PD out index
Type Array
Meaning Number of subindices of this object
Data length 8 bit
Access read
Coding 4
Standard value: 4
Note -
Meaning Default up to 4 parameter addresses to be used as process
data. Only parameters may be used that are allowed as process
data.
Data length 16 bit
Access read / write
Coding 0000h...7FFFh
Standard value: 0000h
Note -
Process Data Mapping
Parameter index
0x218A
Subindex 0
Subindex 1...4
31