KEB COMBIVERT G6 Programming Manual page 45

General Control Card Parameters (Operator Functionality)
Id-Text
os13
Meaning
Type
Data length
Access
Coding
Note
Id-Text
os14
Meaning
Type
Data length
Access
Coding
Note
Name
operator state
Displays the state of the power unit, as well as the image of the
power unit parameter of the control card.
Variable
8 bit
read
Bit 0 reserved
Bit 1...2 PUConfIDState
Bit 3...5 PU image state
Bit 6...15 reserved
Standard value: 0
-
Name
store state
Non-volatile parameters are immediately stored by writing of
value "0". After completion of the storage the value jumps to
status "1". If at the end of the download lists in COMBIVIS the
value "0" comes before value "1", COMBIVIS will send the value
as long as the inverter has completed the storing.
Variable
8 bit
read / write
0: busy
1: ready
2: off
Standard value: 1
-
Parameter index
0x208D
0: PU-ID unknown
2: PU-ID OK
4: PU-ID incorrect
0: PU-Image not init.
1: write PU image
3: PU-Image changed
4: PU-Image init.
5: PU-Image check
6: PU image not available
Parameter index
0x208E
45