KEB COMBIVERT G6 Programming Manual page 42

General Control Card Parameters (Operator Functionality)
42
Id-Text Name
os04 diag error count
Meaning Specifies the number of errors occurred on the diagnostic inter-
face.
Type Variable
Data length 8 bit
Access read / write
Coding 0...255
Standard value: 0
Note
-
Id-Text Name
os05 diag response delay time
Meaning Sets the minimum response delay time for requests on the diag-
nostic interface.
Type
Variable
Data length
8 bit
Access read / write
Coding 0...126 ms
Standard value: 0 ms
Note -
Id-Text Name
os06 baud rate diag
Meaning Default transfer speed on the diagnostic interface.
Type Variable
Data length 8 bit
Access read / write
Coding 0: 1.2 kbit/s
1: 2.4 kbit/s
2: 4.8 kbit/s
3: 9.6 kbit/s
4: 19.2 kbit/s
5: 38.4 kbit/s
6: 55.5 kbit/s
7: 57.6 kbit/s
8: 100 kbit/s
Standard value: 5
Note -
Parameter index
0x2084
Parameter index
0x2085
Parameter index
0x2086