Process Data Mapping; Output Process Data (Manager => Client) - KEB COMBIVERT CONTROL G6 VARAN Programming Manual

PROCeSS DATA MAPPING

4 Process Data Mapping
The setting of the process data assignment can be done in two different ways. One is
through the KEB specific parameters (fb10-fb19), on the other hand about the parame-
ters (co08, c014) which are defined according to the CAN DS301 profile.
After successful adjustment of the process data mapping the process data can be pro-
cessed by the G6 device.
4.1 Output process data (manager => client)
Id-Text
fb10
Type
Meaning
Data length
Access
Coding
Note
Meaning
Data length
Access
Coding
Note
Name
PD out index
Array
Subindex 0
Number of subindices of this object
8 bit
read
8
Standard value: 8
-
Subindex 1...8
Default up to 8 parameter addresses to be used as process
data. Only parameters may be used that are allowed as process
data. The value corresponds byte 2 and 3 of the DS301 param-
eter co08.
16 bit
read / write
0000h...FFFFh
Standard value: 0000h
-
Parameter index
0x218A
13