Product Description; Specified Application - KEB COMBIVERT G6 Programming Manual

2 Product Description

The product family COMBIVERT G6 with safety function STO has been developed for
the use in safety-oriented applications. The basic standards as well as application and
country-specific standards must be observed furthermore. The manual refer to stand-
ards that are complementary to note!
This document is a description of the functions and parameters of the G6 - control card
with IO-Link interface.
The control provides the following functions:
•
•
•
•
•
•
•
•
•

2.1 Specified application

The KEB COMBIVERT serves exclusively for the control and regulation of three-phase
motors. It is intended for installation in electrical systems or machines.
The technical data as well as information concerning the supply conditions shall be tak-
en from the name plate and from the instruction manual and shall be strictly observed.
The used semiconductors and components of the KEB Automation KG are developed
and dimensioned for the use in industrial products.
Limitation
If the KEB COMBIVERT G6 is used in machines, which work under exceptional condi-
tions or if essential functions, life-supporting measures or an extraordinary safety step
must be fulfilled, the necessary reliability and security must be ensured by the machine
builder.
IO-Link device interface
Hardware-installed supply of digital and analog inputs and outputs.
Diagnostic interface (parameter display, scope mode, data exchange)
Hardware of the control circuit „safety separated" according to
TN-C/-S mains)
Inverter state LED
optional with safety function STO (separate manual)
optional f=0 Hz functionality (separate manual)
Brake control
STO functionality
Product Description
EN 61800-3 (base
21