Function Keys And Toolbar; Initial Start-Up; Switch On; Figure 4: Power-On Indicator - KEB COMBIVERT G6 Programming Manual

LC Display Operation

9.1.1.2 Function keys and toolbar

The function keys F1...F4 are variable assigned depending on the menu item. The tool-
bar displays current assignment of the function keys F1 ... F4.
The keys can have the following assignment:

9.2 Initial start-up

9.2.1 Switch on

50
Display Function
DecHex Display changes between decimal and hexadecimal display
Menu jumps to the main menu
Up jumps to the top of the current page, repeated pressing scrolls back
one page
Down jumps to the end of the current page, repeated pressing scrolls forward
to the next page
Table 1: assignment of the function keys
CP01 2203h Set:1
actual frequency display
0.0000 Hz
DecHex
Figure 4: Power-on indicator
At the first switch on with factory setting
the operator indicates the actual frequen-
cy in the customer parameter menu (CP
mode).
To make the basic settings change to the
main menu as follows:
<ESC> → changes to the parame-
ter selection
<F1> → jumps to the main menu
The startup menu
Info
can be defined un-
der "Start mode".