Operator Parameter; Figure 14: Operator Parameter; Figure 15: Select Control Board Parameter Group - KEB COMBIVERT G6 Programming Manual

Operator parameter

11 Operator parameter
56
Inverter parameter
CP mode
Operator parameter
Settings
Figure 14: Operator parameter
os Operator parameter
dp LCD parameter
Menu
Figure 15: Select control board parameter group
Use the operator parameters to configure
the control card, the fieldbus (if available)
and the display.
With the keys < ▲> and <▼> select
"Operator parameter" and confirm with
<ENTER>.
The control card parameters at the
analog / digital control are divided into
two groups:
• os - operator system parameters;
Display and setting of the control
card
• dp - LC display parameter; Configu-
ration of the LC display via bus
With the keys <▲> and <▼> select the
corresponding parameter group.
Top Bottom
<ENTER> switches to the selected sub-
menu.