Ospf Route Redistribution Configuration Example - HP 6125XLG Layer 3 - Ip Routing Configuration Manual

round-trip min/avg/max/std-dev = 0.779/1.408/1.702/0.323 ms

OSPF route redistribution configuration example

Network requirements
• Enable OSPF on all the switches.
Split the AS into three areas.
•
• Configure Switch A and Switch B as ABRs.
Configure Switch C as an ASBR to redistribute external routes (static routes).
•
Figure 23 Network diagram
Configuration procedure
1. Configure IP addresses for interfaces. (Details not shown.)
2. Enable OSPF (see
3. Configure OSPF to redistribute routes:
# On Switch C, configure a static route destined for network 3.1.2.0/24.
<SwitchC> system-view
[SwitchC] ip route-static 3.1.2.1 24 10.4.1.2
# On Switch C, configure OSPF to redistribute static routes.
[SwitchC] ospf 1
[SwitchC-ospf-1] import-route static
Verifying the configuration
# Display the ABR/ASBR information of Switch D.
<SwitchD> display ospf abr-asbr
Type
Intra
Inter
# Display the OSPF routing table on Switch D.
<SwitchD> display ospf routing
"Basic OSPF configuration
OSPF Process 1 with Router ID 10.5.1.1
Routing Table to ABR and ASBR
Destination
10.3.1.1
10.4.1.1
example").
Area Cost
0.0.0.2 10
0.0.0.2 22
100
Nexthop RtType
10.3.1.1 ABR
10.3.1.1 ASBR