HP 6125XLG Layer 3 - Ip Routing Configuration Manual page 179

192.168.0.0/24
10.1.1.0/24
10.1.2.0/24
Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set
3. Run RIPv2 between Switch D and Switch E, and configure IS-IS to redistribute RIP routes on Switch
D:
# Configure RIPv2 on Switch D.
[SwitchD] rip 1
[SwitchD-rip-1] network 10.0.0.0
[SwitchD-rip-1] version 2
[SwitchD-rip-1] undo summary
# Configure RIPv2 on Switch E.
[SwitchE] rip 1
[SwitchE-rip-1] network 10.0.0.0
[SwitchE-rip-1] version 2
[SwitchE-rip-1] undo summary
# Configure IS-IS to redistribute RIP routes on Switch D.
[SwitchD-rip-1] quit
[SwitchD] isis 1
[SwitchD–isis-1] import-route rip level-2
# Display IS-IS routing information on Switch C.
[SwitchC] display isis route
IPv4 Destination
-------------------------------------------------------------------------------
10.1.1.0/24
10.1.2.0/24
192.168.0.0/24
Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set
IPv4 Destination
-------------------------------------------------------------------------------
10.1.1.0/24
10.1.2.0/24
192.168.0.0/24
10.1.4.0/24
10 NULL
20 NULL
20 NULL
Route information for IS-IS(1)
------------------------------
Level-1 IPv4 Forwarding Table
-----------------------------
IntCost ExtCost ExitInterface
10 NULL
10 NULL
10 NULL
Level-2 IPv4 Forwarding Table
-----------------------------
IntCost ExtCost ExitInterface
10 NULL
10 NULL
10 NULL
10 NULL
167
VLAN300 Direct
VLAN300 192.168.0.1
VLAN300 192.168.0.1
NextHop
VLAN100 Direct
VLAN200 Direct
VLAN300 Direct
NextHop
VLAN100 Direct
VLAN200 Direct
VLAN300 Direct
VLAN300 192.168.0.2
D/L/-
R/-/-
R/-/-
Flags
D/L/-
D/L/-
D/L/-
Flags
D/L/-
D/L/-
D/L/-
R/L/-