HP 6125XLG Layer 3 - Ip Routing Configuration Manual page 253

Step
3. Enable BGP route refresh for a
peer or peer group.
4. Return to user view.
5. Perform manual soft-reset.
To configure manual soft-reset (IPv6):
Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
3. Enable BGP route refresh for a
peer or peer group.
4. Return to user view.
Command
•
Enable BGP route refresh for the
specified peer or peer group:
peer { group-name |
ip-address }
capability-advertise
route-refresh
•
Enable BGP route refresh and
multi-protocol extension
capability for the specified peer
or peer group:
undo peer { group-name |
ip-address }
capability-advertise
conventional
return
refresh bgp { ip-address | all |
external | group group-name |
internal } { export | import } ipv4
[ unicast ] [ vpn-instance
vpn-instance-name ]
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
•
Enable BGP route refresh for the
specified peer or peer group:
peer { group-name |
ipv6-address }
capability-advertise
route-refresh
•
Enable BGP route refresh and
multi-protocol extension
capability for the specified peer
or peer group:
undo peer { group-name |
ipv6-address }
capability-advertise
conventional
return
241
Remarks
By default, BGP route refresh is
enabled.
N/A
N/A
Remarks
N/A
N/A
By default, BGP route refresh is
enabled.
N/A