Configuring A Bgp Peer Group - HP 6125XLG Layer 3 - Ip Routing Configuration Manual

Step
3. Create an IPv4 BGP peer and
specify its AS number.
4. (Optional.) Configure a
description for a peer.
5. Create the BGP IPv4 unicast
address family or BGP-VPN
IPv4 unicast address family
and enter its view.
6. Enable the router to exchange
IPv4 unicast routing
information with the specified
peer.
Configuring an IPv6 BGP peer
Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
3. Create an IPv6 BGP peer and
specify its AS number.
4. (Optional.) Configure a
description for a peer.
5. Create the BGP IPv6 unicast
address family or BGP-VPN
IPv6 unicast address family
and enter its view.
6. Enable the router to exchange
IPv6 unicast routing
information with the specified
peer.

Configuring a BGP peer group

The peers in a peer group use the same route selection policy.
In a large-scale network, many peers can use the same route selection policy. You can configure a peer
group and add these peers into this group. When you change the policy for the group, the modification
also applies to the peers in the group.
A peer group is an IBGP peer group if peers in it belong to the local AS, and is an EBGP peer group if
peers in it belong to different ASs.
Command
peer ip-address as-number
as-number
peer ip-address description
description-text
address-family ipv4 [ unicast ]
peer ip-address enable
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
peer ipv6-address as-number
as-number
peer ipv6-address description
description-text
address-family ipv6 [ unicast ]
peer ipv6-address enable
197
Remarks
By default, no IPv4 BGP peer is
created.
By default, no description is
configured for a peer.
By default, the BGP IPv4 unicast
address family or BGP-VPN IPv4
unicast address family is not
created.
By default, the router cannot
exchange IPv4 unicast routing
information with the peer.
Remarks
N/A
N/A
By default, no IPv6 BGP peer is
created.
By default, no description is
configured for a peer.
By default, the BGP IPv6 unicast
address family or BGP-VPN IPv6
unicast address family is not
created.
By default, the router cannot
exchange IPv6 unicast routing
information with the peer.