HP 6125XLG Layer 3 - Ip Routing Configuration Manual page 226

Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
3. Enter BGP IPv4 unicast
address family view or
BGP-VPN IPv4 unicast
address family view.
4. Configure BGP route
reception filtering policies.
To configure BGP route reception filtering policies (IPv6):
Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
address-family ipv4 [ unicast ]
•
Reference an ACL or IP prefix list to
filter BGP routes received from all
peers:
filter-policy { acl-number | prefix-list
prefix-list-name } import
•
Reference a routing policy to filter
BGP routes received from a peer or
peer group:
peer { group-name | ip-address }
route-policy route-policy-name
import
•
Reference an ACL to filter BGP routes
received from a peer or peer group:
peer { group-name | ip-address }
filter-policy acl-number import
•
Reference an AS path list to filter
BGP routes received from a peer or
peer group:
peer { group-name | ip-address }
as-path-acl as-path-acl-number
import
•
Reference an IPv4 prefix list to filter
BGP routes received from a peer or
peer group:
peer { group-name | ip-address }
prefix-list prefix-list-name import
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
214
Remarks
N/A
N/A
N/A
Use at least one method.
By default, no route reception
filtering is configured.
Remarks
N/A
N/A