Ospf Route Redistribution Configuration Example - HP VSR1000 Configuration Manual

Routing for Network
Destination
10.2.1.0/24
10.3.1.0/24
10.4.1.0/24
10.5.1.0/24
10.1.1.0/24
Total Nets: 5
Intra Area: 3
# Display OSPF routing information on Router D.
[RouterD] display ospf routing
Routing for Network
Destination
10.2.1.0/24
10.3.1.0/24
10.4.1.0/24
10.5.1.0/24
10.1.1.0/24
Total Nets: 5
Intra Area: 2
# Ping 10.4.1.1 to test reachability.
[RouterD] ping 10.4.1.1
Ping 10.4.1.1 (10.4.1.1): 56 data bytes, press CTRL_C to break
56 bytes from 10.4.1.1: icmp_seq=0 ttl=253 time=1.549 ms
56 bytes from 10.4.1.1: icmp_seq=1 ttl=253 time=1.539 ms
56 bytes from 10.4.1.1: icmp_seq=2 ttl=253 time=0.779 ms
56 bytes from 10.4.1.1: icmp_seq=3 ttl=253 time=1.702 ms
56 bytes from 10.4.1.1: icmp_seq=4 ttl=253 time=1.471 ms
--- Ping statistics for 10.4.1.1 ---
5 packet(s) transmitted, 5 packet(s) received, 0.0% packet loss
round-trip min/avg/max/std-dev = 0.779/1.408/1.702/0.323 ms

OSPF route redistribution configuration example

Network requirements
• Enable OSPF on all the routers.
Split the AS into three areas.
•
OSPF Process 1 with Router ID 10.2.1.1
Routing Tables
Cost
1
2
2
3
1
Inter Area: 2
OSPF Process 1 with Router ID 10.5.1.1
Routing Tables
Cost
3
1
4
1
2
Inter Area: 3
Type NextHop
Transit 10.2.1.1
Inter 10.1.1.2
Stub 10.2.1.2
Inter 10.1.1.2
Transit 10.1.1.1
ASE: 0 NSSA: 0
Type NextHop
Inter 10.3.1.1
Transit 10.3.1.2
Inter 10.3.1.1
Stub 10.5.1.1
Inter 10.3.1.1
ASE: 0 NSSA: 0
98
AdvRouter Area
10.2.1.1 0.0.0.1
10.3.1.1 0.0.0.0
10.4.1.1 0.0.0.1
10.3.1.1 0.0.0.0
10.2.1.1 0.0.0.0
AdvRouter Area
10.3.1.1 0.0.0.2
10.3.1.1 0.0.0.2
10.3.1.1 0.0.0.2
10.5.1.1 0.0.0.2
10.3.1.1 0.0.0.2