HP 6125XLG Layer 3 - Ip Routing Configuration Manual page 214

Step
3. Create an EBGP peer group.
4. Create an IPv6 BGP peer and
specify its AS number.
5. Add the peer into the EBGP
peer group.
6. (Optional.) Configure a
description for the peer group.
7. Create the BGP IPv6 unicast
address family or BGP-VPN
IPv6 unicast address family
and enter its view.
8. Enable the router to exchange
IPv6 unicast routing
information with peers in the
specified peer group.
To configure an EBGP peer group by using Method 3 (IPv4):
Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
3. Create an EBGP peer group.
4. Add a peer into the EBGP
peer group.
5. (Optional.) Configure a
description for the peer group.
6. Create the BGP IPv4 unicast
address family or BGP-VPN
IPv4 unicast address family
and enter its view.
7. Enable the router to exchange
IPv4 unicast routing
information with peers in the
specified peer group.
To configure an EBGP peer group by using Method 3 (IPv6):
Command
group group-name external
peer ipv6-address as-number
as-number
peer ipv6-address group
group-name [ as-number
as-number ]
peer group-name description
description-text
address-family ipv6 [ unicast ]
peer group-name enable
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
group group-name external
peer ip-address group group-name
as-number as-number
peer group-name description
description-text
address-family ipv4 [ unicast ]
peer group-name enable
202
Remarks
By default, no EBGP peer group is
created.
By default, no IPv6 BGP peer is
created.
By default, no peer exists in the
peer group.
The as-number as-number option,
if used, must specify the same AS
number as the peer ip-address
as-number as-number command.
By default, no description is
configured for the peer group.
By default, the BGP IPv6 unicast
address family or BGP-VPN IPv6
unicast address family is not
created.
By default, the router cannot
exchange IPv6 unicast routing
information with the peers.
Remarks
N/A
N/A
By default, no EBGP peer group is
created.
By default, no peer exists in the
peer group.
By default, no description is
configured for the peer group.
By default, the BGP IPv4 unicast
address family or BGP-VPN IPv4
unicast address family is not
created.
By default, the router cannot
exchange IPv4 unicast routing
information with the peers.