HP 6125XLG Layer 3 - Ip Routing Configuration Manual page 275

# Configure Switch B.
[SwitchB] bgp 65009
[SwitchB-bgp] router-id 2.2.2.2
[SwitchB-bgp] peer 3.1.1.2 as-number 65008
[SwitchB-bgp] address-family ipv4 unicast
[SwitchB-bgp-ipv4] peer 3.1.1.2 enable
4. Configure BGP and IGP route redistribution:
# Configure route redistribution between BGP and OSPF on Switch B.
[SwitchB-bgp-ipv4] import-route ospf 1
[SwitchB-bgp-ipv4] quit
[SwitchB-bgp] quit
[SwitchB] ospf 1
[SwitchB-ospf-1] import-route bgp
[SwitchB-ospf-1] quit
# Display the BGP routing table on Switch A.
[SwitchA] display bgp routing-table ipv4
Total number of routes: 3
BGP local router ID is 1.1.1.1
Status codes: * - valid, > - best, d - dampened, h - history,
Network
* >e 3.3.3.3/32
* > 8.1.1.0/24
* >e 9.1.2.0/24
# Display the OSPF routing table on Switch C.
[SwitchC] display ospf routing
OSPF Process 1 with Router ID 3.3.3.3
Routing for Network
Destination
9.1.1.0/24
2.2.2.2/32
Routing for ASEs
Destination
8.1.1.0/24
Total Nets: 3
Intra Area: 2
s - suppressed, S - stale, i - internal, e - external
Origin: i - IGP, e - EGP, ? - incomplete
NextHop
3.1.1.1
8.1.1.1
3.1.1.1
Routing Tables
Cost Type
1 Transit 9.1.1.2
1 Stub
Cost Type
1 Type2
Inter Area: 0 ASE: 1
263
MED LocPrf
1
0
1
NextHop AdvRouter
3.3.3.3
9.1.1.1 2.2.2.2
Tag NextHop
1 9.1.1.1
NSSA: 0
PrefVal Path/Ogn
0 65009?
32768 i
0 65009?
Area
0.0.0.0
0.0.0.0
AdvRouter
2.2.2.2