Configuring Bfd For Static Routes; Bidirectional Control Mode - HP 6125XLG Layer 3 - Ip Routing Configuration Manual

Blade switch
Hide thumbs Also See for 6125XLG:
Table of Contents

Advertisement

Step
4.
(Optional.) Delete all
static routes,
including the default
route.

Configuring BFD for static routes

IMPORTANT:
Enabling BFD for a flapping route could worsen the situation.
BFD provides a general-purpose, standard, medium-, and protocol-independent fast failure detection
mechanism. It can uniformly and quickly detect the failures of the bidirectional forwarding paths between
two routers for protocols, such as routing protocols and MPLS.
For more information about BFD, see High Availability Configuration Guide.

Bidirectional control mode

To use BFD bidirectional control detection between two devices, enable BFD control mode for each
device's static route destined to the peer.
To configure a static route and enable BFD control mode for it, specify an output interface and a direct
next hop, or specify an indirect next hop and a specific BFD packet source address for the static route.
To configure BFD control mode for a static route (direct next hop):
Step
1.
Enter system view.
2.
Configure BFD
control mode for a
static route.
To configure BFD control mode for a static route (indirect next hop):
Step
1.
Enter system view.
Command
delete [ vpn-instance vpn-instance-name ]
static-routes all
Command
system-view
Method 1:
ip route-static dest-address { mask-length | mask }
interface-type interface-number next-hop-address
bfd control-packet [ preference preference-value ]
[ tag tag-value ] [ description description-text ]
Method 2:
ip route-static vpn-instance s-vpn-instance-name
dest-address { mask-length | mask } interface-type
interface-number next-hop-address bfd
control-packet [ preference preference-value ] [ tag
tag-value ] [ description description-text ]
Command
system-view
9
Remarks
To delete one static route,
use the undo ip route-static
command.
Remarks
N/A
Use either method.
By default, BFD control
mode for a static route is
not configured.
Remarks
N/A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5920 series5900 series

Table of Contents