Siemens SINUMERIK User Manual page 57

Parameters in the window for working area limitation
①
Displays the axes that exist in the machine coordinate system (MCS), workpiece coordinate system (WCS), or
relative coordinate system (REL).
② ④
The minimum/maximum traversing distance specified for the axes.
/
③ ⑤
Activates or deactivates the entered minimum/maximum values.
/
⑥
Unit for the traversing distance.
Modifying miscellaneous setting data
Operating sequence
+
Programming and Operating Manual (Turning)
01/2017
6. Press this key to activate or deactivate the entered minimum/maximum values.
1. Select the system data operating area.
2. Open the window for machine data.
3. Open the window for the expert list.
4. Select a group of setting data you desire to modify.
5. Use these softkeys to search for your desired setting data with the data number/name.
Alternatively, you can position the cursor bar in the input fields to be modified and enter the
values.
You can use the following softkeys to switch to the desired axis when modifying the axis-
specific setting data.
57