Alarm Operating Area - Siemens SINUMERIK User Manual

A.1.6

Alarm operating area

Softkey functions
Press this key on the PPU to enter the alarm operating area. You can check the NC and drive alarms using the
softkeys. PLC alarms are not sorted.
①
Displays all alarms sorted by their priorities. The highest priority alarm is at the beginning of the list.
②
Displays the alarms sorted by the time of their occurrence. The most recent alarm stands at the beginning of the list.
③
Displays the alarms sorted by the time of their occurrence. The oldest alarm stands at the beginning of the list.
④
Displays the alarms on the drives. Note that this softkey is available on the PPU161.3 and PPU160.2 only.
⑤
Stops/starts updating of pending alarms
⑥
Views and manages the alarm log
⑦
Configures the access right for the remote control through the Ethernet connection. For more information about the
softkey function, see the SINUMERIK 808D/SINUMERIK 808D ADVANCED Commissioning Manual.
250
Views the service information
Defines the maintenance planner
Programming and Operating Manual (Turning)
01/2017